Laboratory Nano Spray Dryer
Laboratory Nano Spray Dryer
Nano Spray Dryer for Nano Particle Generation & Drying
- Nano Spray Dryer gently process the smallest sample amounts into submicron particles with minimal product loss by increasing the surface contact area. The solution is fed through a Syringe pump to the Ultrasonic Spray Nozzle, the solution is sprayed with the Ultrasonic Spray Nozzle into the Drying Chamber at set Temperature with the accuracy of +1°C. Resulting in a fine spray (Mist) of droplets which comes in contact with the hot air. Evaporation of moisture from droplets (Mist) & formation of Dry particles (Sub-micron) proceeds under controlled temperature & Airflow conditions. The gentle process conditions help preserve molecular activity in your compounds of interest.
- The Ultrasonic Nozzle can handle PH in the range of 0 to 14. The piezo driven spray head optimizes your productivity and makes your system easier to handle.
Features
Technical Specifications
Features
- PLC based with 4.3” touch screen.
- Syringe Pump for Precision Feed
- Online data logging and temperature graphs.
- Two-way communications with PC, Laptop and HMI.
- Provided with digital vacuum and pressure indicator.
- Sample Protection with monitoring of Outlet Temperature and Temperature of the sample.
- SS with dull Pharma finish.
- Compact Design with ease of cleaning post usage.
Technical Specifications
- Evaporation Rate: Approx. 400ml./Hr.(H20)
- Inert Air Temperature: Ambient to 130°C
- Heater Capacity: 3KW.
- Power Supply:
- 220-240 VAC 650Hz
- single Phase Max.15A
- MOC: S.S with dull pharama finish
- Aspiration Blower: 0.5HP x 2800RPM 3 phase FLP motor.
- Fresh Air Filter:
- Pre Filter 5 Microns.
- Hepa Filter 0.3 Microns.
- Nozzle operating Frequency – 120 KHz
- Nozzle Tip – Titanium Alloy 6AI – 4V
- Max. Oprating Temperature – 130° C (Inlet Air Temperature).
- Droplet size – 120KHz Nozzle < 10 to 20 microns*
